- Ndị na-egbutu PDC maka igwu kol
- polycrystaline diamond kọmpat maka mkpọ mmanụ
- PDC bọtịnụ maka igwu mmiri mmiri
- Nha ntinye PDC dịgasị iche site na 0804, 0808, 1313, 1308 ruo 1616, 1919
nkọwa
Anyị nwere ụlọ ọrụ mmepụta ihe pụrụ iche na tungsten carbide, anyị na-enyekwa ọtụtụ ngwaahịa ndị ọzọ anyị enweghị ike imepụta. gbalịsiri ike nweta ngwaahịa kacha mma maka ndị chọrọ inweta ezigbo mma na ngwaahịa ọnụahịa kacha mma.
Ngwuputa coal na-eji PDC cutter Flat PDC bọtịnụ
Okwu mmeghe nke PDC:
Polycrystalline kọmpat diamond
Ndị na-egbutu polycrystalline diamond compact (PDC) na-egosipụta nkwụsi ike nkwụsi ike n'etiti carbide na diamond iji belata delamination nke elu diamond. A na-enwekwa ndị na-egbutu ihe ndị a nwere ihe ngosi 3D nwere nhazi iji belata mmebi site na mmetụta na nrụgide mkparị. Ihe mejupụtara micron sized nke diamond sịntetik, sintered na nke jikọtara ya na cemented tungsten carbide substrate na-eji akwa dị elu. usoro okpomọkụ / elu-nrụgide.
Isi Uru
• Njupụta dị elu (porosity dị ala)
• Nnukwu ihe mejupụtara & structural homogeneity
• Mma mma nkekọ n'etiti diamond ahụ
• Akwa mkpuchi mkpuchi
• Mmetụta mmetụta dị elu
• Nkwụsi ike dị elu nke okpomọkụ
• Kachasị mma interface n'etiti diamond na tungsten-carbide n'ígwé maka ọmarịcha njikọ
• Best n'ozuzu arụmọrụ dị na ahịa
Ngwa nke PDC cutters
- Mmanụ na gas PDC ibe n'ibe dị ka ihu, nlele, na ndabere cutters |
-PDC ibe n'ibe maka geothermal mkpọ ala |
-PDC ibe n'ibe maka igwu olulu mmiri |
-PDC ibe n'ibe maka ntụziaka mkpọpu |
- Reaming ngwaọrụ |
- Isi ibe n'ibe |
- ihe na-ebu |
Nha nke Flat PDC cutters
Flat PDC cutters | |||||
Ụdị No. | Dayameta | Mgbakọta Ogologo | Ogologo diamond | Chamfer | Ọkwa |
FC0808 | 8.00 | 8.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC0808 | 8.00 | 10.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1008 | 10.00 | 8.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1010 | 10.00 | 10.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1308 | 13.00 | 8.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1313 | 13.00 | 13.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1608 | 16.00 | 8.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1610 | 16.00 | 10.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1613 | 16.00 | 13.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
FC1616 | 16.00 | 16.0 | 1.5-1.8 | 0.3mm×45° | Ngwuputa ihe |
Ụgwọ nke ụlọ ọrụ Zhuzhou Better Tungsten Carbide Co., Ltd
Adreesị:B/V 12-305, Da Han Hui Pu Industrial Park, Obodo Zhuzhou, China.
Ekwentị:+86 18173392980
Tel:0086-731-28705418
Faksị:0086-731-28510897
Email:zzbt@zzbetter.com
WhatsApp/Wechat:+86 181 7339 2980
