- Taupānga: mo te hanga drill
- Diamita: 4.5mm ki te 20mm
- Te roa: 330mm / 310mm kua whakaritea ranei
- Rauemi: WC+Co
whakaahuatanga
Kei a matou he wheketere motuhake ki te tungsten carbide, ka tukuna ano e matou etahi atu hua kaore e taea e matou te whakaputa. ka whakapau kaha ki te whakaputa i nga hua tino pai mo te hunga e hiahia ana ki te whiwhi hua kounga pai me nga hua utu pai.
He aha te rakau tungsten carbide?
Tungsten carbide rod, e kiia ana ko te carbide porowhita,rakau carbide cimented,he mea tino pakeke, he kaha nui me te tino pakeke he rauemi mata nui o te WC, me etahi atu konganuku me nga wahanga whakapiri ma te whakamahi i nga tikanga whakarewa paura na roto i te whakaheke iti-pēhanga.
He aha te uara o nga rakau carbide cimented?
Tte rakau carbide ungstenKo te mea tino pai mo te hanga taputapu tapahi whakarewa, e whakamahia nuitia ana i roto i nga ahumahi he nui nga whakaritenga mo te kakahu-aukati, te waikura-aukati me te wera teitei. He nui nga mahi tino pai.
He aha nga whakamahinga o nga rakau tungsten carbide?
Ka taea te whakamahi rakau carbide ehara i te mea mo nga taputapu tapahi me te keri anake (pēnei i te micron, nga wiri hurihuri, nga korero mo nga taputapu maina poutū), engari mo nga ngira whakauru, nga momo waahanga kua mau me nga mea hanga. I tua atu, ka taea te whakamahi i nga waahi maha, penei i te miihini, te matū, te hinu, te whakarewa, te hikohiko me nga ahumahi tiaki.
1.Carbide rakau mo te hanga taputapu tapahi
2.Carbide rakau mo te hanga punches
3.Carbide rakau mo te hanga mandrels
4.Carbide rakau mo te hanga taputapu mau
5.Carbide rakau mo te hanga plunger
6.Carbide rakau mo te hanga taputapu wero
1. Momo Whakatakotoranga:ØD×Ød× L
2. Te tono: mo te hanga taputapu tapahi, penei i te drill.
3. Diameter: 4.5mm ki te 30mm
4. Te roa: te paerewa 330mm / 310mm kua whakaritea ranei
5. Mata: papatea, whenua ranei
6. Rauemi: WC+CO
| Ingoa Hua | Cnga rakau arbide me te poka whakamatao i waenganui |
| Rauemi | WC+CO |
| Kōeke | K05-K40 |
| Rahi witi | pai, reo |
| Te pakeke | 87.6-94HRA |
| T.R.S | 3000-4200 |
| Mata | parakore, whenua ranei |
| Taupānga | Ka whakamahia mo te hanga taputapu tapahi penei i te wiri |
Ngā āhuatanga kōeke
Kōeke | Waehere ISO | Rahi witi | Cobalt | Kiato (g/cm3) | Maama (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Nga tono tohu
Kōeke | Te tono e taunaki ana |
UBT05 | E taunakihia ana te wiriwiri, te mira mutunga me te burr. He pai rawa mo te tapahi konganuku kore-ferrous me te graphite (me whakakikoruatia) |
UBT10 | Te rahi o te witi tino pai, he pai te whakakakahu. Ka tūtohuhia nga taputapu whakairo me nga taputapu whakairo teitei ake. He pai mo te tapahi PCB me te kirihou |
UBT20F | Ka tūtohuhia te tarai me te mira mutunga. E tika ana mo te tapahi rino whanui (HRC |
UBT20 | E taunakitia ana te drill me te mira mutunga. He pai mo te tapahi i te rino kowiri, te whakangao wera me te rino maka |
UBT25 | Ko te rahi o te witi tino pai, ko te ihirangi cobalt teitei me te tino pakeke me te uaua, te mira mutunga me te reamer e taunaki ana, he tino pai mo tapahi maitai (HRC: 45-55), konumohe konumohe me te titanium alloy |
UBT30 | He pai mo te hanga i te werohanga o nga maaka, nga taputapu me te pae hoha aukati i te wiri, aha atu |
Ko nga inenga e whakamahia ana kei raro nei
Momo | Tol.o te diameter(mm) | Roa(mm) | Tol.o te roa(mm) |
Ø4.5×Ø0.8×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø6.0×Ø1.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø7.0×Ø1.5×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø8.0×Ø1.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø8.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø9.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø10.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø10.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø11.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø12.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø12.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø13.0×Ø2.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø14.0×Ø3.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø16.0×Ø3.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø16.0×Ø4.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø18.0×Ø3.0×330 | +0.60/+0.25 | 330/310 | -0~+0.5 |
Ø20.0×Ø4.0×330 | +0.65/+0.25 | 330/310 | -0~+0.5 |
Kua tuhia: ka taea e matou te whakaputa i nga rakau tungsten carbide mo ia tono a te kaihoko
Zhuzhou Better Tungsten Carbide Co., Ltd
ADDRESS:B/V 12-305, Da Han Hui Pu Industrial Park, Zhuzhou City, Haina.
Waea:+86 18173392980
Waea:0086-731-28705418
Waeatuhi:0086-731-28510897
Īmēra:zzbt@zzbetter.com
Whatsapp/Wechat:+86 181 7339 2980
