- Fa'aoga: mo le faia o vili
- Diamita: 4.5mm i le 20mm
- Umi: 330mm/310mm poʻo faʻapitoa
- Mea: WC+Co
fa'amatalaga
Matou te umia se falegaosimea faʻapitoa i le tungsten carbide, matou te tuʻuina atu foi le tele o isi oloa e le mafai ona matou gaosia. tuuto atu i punaoa sili oloa mo i latou e fia maua oloa lelei ma tau sili ona lelei.
O le a le tungsten carbide rod?
Tungsten carbide rod, e taʻua foi carbide lapotopoto pa,sima carbide rod,o se mea maualuga-maaa, maualuga-malosi ma maualuga-maaa mea o loʻo i ai se mea mataʻutia tele o le WC, faʻatasi ai ma isi uʻamea ma faʻapipiʻi vaega e faʻaaoga ai metotia metallurgical paʻu e ala i le sintering maualalo.
O le a le tau o u'amea fa'amalama sima?
TUngsten carbide rodo le mea e sili ona fiafia i ai mo le gaosiga o meafaigaluega faʻapipiʻi uʻamea, faʻaaogaina lautele i alamanuia o loʻo i ai tulaga maualuga mo le ofuina-tetee, faʻafefe-teteʻe ma le maualuga o le vevela. E tele naua fa'atinoga mata'ina.
O le a le faʻaogaina o tootoo tungsten carbide?
E mafai ona fa'aogaina u'amea carbide e le gata mo le tipiina ma le viliina o mea faigaluega (e pei o le micron, mimilo vili, vili tūsa'o fa'amatalaga meafaigaluega eli), ae fa'apena fo'i mo nila fa'aulu, vaega eseese lola ua ofuina ma mea faufale. E le gata i lea, e mafai ona faʻaaogaina i le tele o matata, e pei o masini, vailaʻau, suauʻu, metallurgy, eletise ma fale puipui.
1. Carbide laau mo le faia o meafaigaluega tipi
2. Carbide laau mo le faia o punches
3.Carbide laau mo le faia mandrels
4.Carbide la'au mo le faia o mea faigaluega umia
5.Carbide laau mo le faia plunger
6. Carbide la'au mo le faia o meafaigaluega tui
1. Ituaiga Fa'amatalaga:ØD×Ød× L
2. Talosaga: mo le faia o meafaigaluega tipi, e pei o le vili.
3. Diamita: 4.5mm i le 30mm
4. Umi: tulaga masani 330mm / 310mm poʻo faʻapitoa
5. Lau'ele'ele: avanoa po'o le eleele
6. Mea: WC + CO
| Igoa Oloa | Ctootoo arbide ma pu malulu totonugalemu |
| Mea | WC+CO |
| Vasega | K05-K40 |
| Tele o Saito | lelei, feololo |
| Malosi | 87.6-94HRA |
| T.R.S | 3000-4200 |
| Laufanua | avanoa po o eleele |
| Fa'atatauga | Fa'aoga mo le gaosiaina o mea faigaluega e pei o vili |
Fa'ailoga meatotino
Vasega | ISO Code | Tele o Saito | Cobalt | Malosi (g/cm3) | Malosi (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Fa'ailoga tusi talosaga
Vasega | Fautuaina talosaga |
UBT05 | E fautuaina le vili, fa'au'u ma le pulu. Fa'apitoa mo le tipiina o u'amea e le o ni u'amea ma graphite (e mana'omia le ufiufi) |
UBT10 | Ole lapo'a o saito e matua'i lelei, ma lelei e tete'e. E sili atu le fa'alavalava o le ili ma mea faigaluega togitogiga e fautuaina. E fetaui mo le tipiina o le PCB ma palasitika |
UBT20F | E fautuaina le vili ma le endmill. E fetaui mo le tipiina o le uamea lautele (HRC |
UBT20 | E fautuaina le vili ma le vili. E fetaui mo le tipiina o u'amea u'amea, u'amea e tete'e vevela ma le u'amea |
UBT25 | Ole tele ole saito e sili ona lelei, maualuga le cobalt ma'a'a ma le ma'a'a lelei, endmill ma reamer e fautuaina, aemaise e fetaui mo tipi uamea (HRC: 45-55), alumini alumini ma titanium uʻamea |
UBT30 | E fetaui mo le faia o le tu'i o limu, mea faigaluega ma le fa'ateteina o le pa'u ma isi |
Ole fua e masani ona fa'aogaina e pei o lalo
Ituaiga | Tol.o le lautele(mm) | Umi(mm) | Tol.o le umi(mm) |
Ø4.5×Ø0.8×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø6.0×Ø1.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø7.0×Ø1.5×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø8.0×Ø1.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø8.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø9.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø10.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø10.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø11.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø12.0×Ø2.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø12.0×Ø3.0×330 | +0.50/+0.25 | 330/310 | -0~+0.5 |
Ø13.0×Ø2.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø14.0×Ø3.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø16.0×Ø3.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø16.0×Ø4.0×330 | +0.55/+0.25 | 330/310 | -0~+0.5 |
Ø18.0×Ø3.0×330 | +0.60/+0.25 | 330/310 | -0~+0.5 |
Ø20.0×Ø4.0×330 | +0.65/+0.25 | 330/310 | -0~+0.5 |
Fa'amauina: e mafai ona matou gaosia tungsten carbide rods i le talosaga a le tagata fa'atau
Zhuzhou Better Tungsten Carbide Co., Ltd
TUSI:B/V 12-305, Da Han Hui Pu Industrial Park, Zhuzhou City, Saina.
Telefoni:+86 18173392980
Telefoni:0086-731-28705418
Fax:0086-731-28510897
imeli:zzbt@zzbetter.com
Whatsapp/Wechat:+86 181 7339 2980
