- Codsiga: samaynta layliga
- Dhexroorka: 6.3mm ilaa 20.3mm
- Dhererka: 330mm/310mm ama la habeeyey
- Qalabka: WC+Co
sharaxaad
Waxaan leenahay warshad ku takhasustay tungsten carbide, sidoo kale waxaan bixinaa alaabo kale oo badan oo aynaan soo saari karin. waxaa ka go'an in loo helo agabka ugu wanaagsan ee raba in uu helo alaab tayo wanaagsan iyo qiimo wanaagsan.
Waa maxay usha carbide tungsten?
Usha carbide Tungsten, oo sidoo kale loo yaqaan 'carbide round bar',ul carbide sibidhka,waa qalab adag oo adag, adag oo sarreeya oo leh walxo cayriin oo weyn oo WC ah, oo leh biraha kale iyo wejiyada dhejiska oo isticmaalaya hababka birta ah ee budada iyada oo loo marayo sintering hoose.
Waa maxay qiimaha ay leeyihiin ulaha carbide sibidhka?
Tungsten carbide ushawaa alaabta la doorbido ee wax-soo-saarka qalabka birta, oo si ballaaran loo isticmaalo warshadaha kuwaas oo leh shuruudo sare oo loogu talagalay xirashada-iska-caabbinta, iska-caabbinta-iska-caabbinta iyo iska caabbinta heerkulka sare. Waxay leedahay waxqabad aad u fiican.
Waa maxay isticmaalka tungsten carbide ulaha?
Ulaha Carbide waxaa loo isticmaali karaa ma aha oo kaliya jarida iyo qodista qalabka (sida micron, layliyo qalloocan, qodista qeexitaan qalab macdan qodista toosan), laakiin sidoo kale loogu talagalay cirbadaha galinta, qaybaha duudduuban oo kala duwan oo xiran iyo qalabka dhismaha. Intaa waxaa dheer, waxaa loo isticmaali karaa meelo badan, sida mishiinada, kiimikooyinka, petroleum, metallurgy, electronics iyo warshadaha difaaca.
1.Ulaha Carbide ee samaynta qalabka wax lagu gooyo
2.Ulaha Carbide ee feerka lagu sameeyo
3.Ulaha Carbide samaynta mandrels
4.Ulaha kaarbide ee samaynta agabka xajiyaha
5.Ulaha Carbide samaynta plunger
6.Ulaha Carbide ee samaynta aaladaha daloolista
1. Nooca Tilmaamaha:ØD×2Ød×TKØ×LB, L waxay muujinaysaa dhererka, B waxay muujinaysaa xagal helical30 darajo ugu badan, iyo 15°, 40°, 45° waa ikhtiyaari.
2. Codsiga: samaynta qalabka wax lagu gooyo, sida daloolista.
3. Dhexroorka: 6.3mm ilaa 20.3mm
4. Dhererka: heerka 330mm / 310mm ama la habeeyey
5. Dusha sare: madhan ama dhulka
6. Qalabka: WC+CO
| Magaca Alaabta | Culaha ka soo baxa oo leh laba daloolo oo helical |
| Qalab | WC+CO |
| Darajo | K05-K40 |
| Cabirka Hadhuudhka | fiican, dhexdhexaad ah |
| Adag | 87.6-94HRA |
| T.R.S | 3000-4200 |
| Dusha sare | bannaan ama dhul |
| Codsiga | Loo isticmaalo soo saarista agabka goynta sida daloolista |
Guryaha darajada
Darajo | ISO Code | Cabirka Hadhuudhka | Cobalt | Cufnaanta (g/cm3) | Hardness (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
Codsiyada darajada
Darajo | Codsiga lagu taliyay |
UBT05 | Qodista, dhar-dharka iyo burka ayaa lagula talinayaa. Gaar ahaan ku habboon jarida birta aan birta ahayn iyo graphite (dahaarka ayaa loo baahan yahay) |
UBT10 | Xajmiga ultrafine cabbirka, oo leh xidhashada u adkaysta. Qalabka dhamaadka xidhashada u adkaysta sare iyo qalabka xardho ayaa lagula talinayaa. Ku habboon goynta PCB iyo caag |
UBT20F | Qodista iyo mashiinka dhamaadka ayaa lagula talinayaa. Ku habboon jarista birta guud (HRC |
UBT20 | Qodista iyo dhar-dharka ayaa lagula talinayaa. Ku habboon jarista birta aan fiicnayn, daawaha kulaylka u adkaysta iyo birta shubka ah |
UBT25 | Cabbirka hadhuudhka ultrafine, kakoobyo sare leh oo leh engegnaan aad u wanaagsan iyo adayg, mill iyo reamer ayaa lagula talinayaa, gaar ahaan ku habboon jarida birta(HRC:45-55), aluminium aluminium iyo daawaha titanium |
UBT30 | Ku habboon samaynta feedhyada caaryada, agabka iyo baar caajiska ka-hortagga gariir iwm |
Cabbirrada sida caadiga ah loo isticmaalo waa sida hoose
Dure Dhexroor (mm) | TK(mm) | Dhexroorka gudaha (mm) | Dhererka (mm) | Dhererka (mm) | |||||
Dhexroorka | Dulqaad | TK | Dulqaad | dhexroorka | Dulqaad | Garoon | Dulqaad | Dhererka | Dulqaad |
6.3 | 0.3 | 2.60 | -0.4~0 | 0.7 | ±0.15 | 32.65 | -0.65~0.67 | 330 | 0~+1.5 |
8.3 | 0.3 | 4.00 | -0.4~0 | 1.00 | ±0.15 | 43.53 | -0.86~0.89 | 330 | 0~+1.5 |
10.3 | 0.3 | 4.80 | -0.6~0 | 1.40 | ±0.15 | 54.41 | -1.08~1.11 | 330 | 0~+1.5 |
12.3 | 0.4 | 6.25 | -0.8~0 | 1.40 | ±0.15 | 65.3 | -1.30~1.34 | 330 | 0~+1.5 |
14.3 | 0.4 | 7.10 | -0.8~0 | 1.75 | ±0.15 | 76.18 | -1.51~1.56 | 330 | 0~+1.5 |
15.3 | 0.4 | 7.70 | -0.8~0 | 1.75 | ±0.15 | 79.45 | -1.58~1.62 | 330 | 0~+1.5 |
16.3 | 0.5 | 8.30 | -0.8~0 | 1.75 | ±0.15 | 87.06 | -1.73~1.78 | 330 | 0~+1.5 |
| 18.3 | 0.5 | 10.40 | -1~0 | 2.00 | ±0.15 | 97.95 | -1.94~2.00 | 330 | 0~+1.5 |
| 20.3 | 0.5 | 10.40 | -1~0 | 2.00 | ±0.15 | 108.83 | -2.16~2.23 | 330 | 0~+1.5 |
Xusuusin: waxaan soo saari karnaa ulaha carbide tungsten codsi kasta oo macmiil ah
Lacag bixinta soo socota ee saamiyada Zhuzhou Better Tungsten Carbide Co., Ltd
CINWAANKA:B/V 12-305, Da Han Hui Pu Industrial Park, Magaalada Zhuzhou, Shiinaha.
Taleefanka:+86 18173392980
Tel:0086-731-28705418
Fakis:0086-731-28510897
iimaylka:zzbt@zzbetter.com
Whatsapp/Wechat:+86 181 7339 2980
