- High durability
- Various types
- Excellent shock resistance
- Good performance in rought working situation
description
Description of carbide HPGR studs:
HPGR is an energy-efficient crushing equipment used to reduce particles by compressing and crushing the feed between two counter rotating, parallel rollers with a small gap between them. HPGR is widely used in grinding cement clinker, limestone, bauxite, iron ore..The tungsten carbide HPGR studs are installed in high pressure grinding roller as the wear roller surface to grinding those stone or ore.
Tungsten carbide studs also called cemented carbide studs, carbide buttons and carbide studs for HPGR. The tungsten carbide HPGR STUDS which made from tungsten carbide will inlaid on the body of the high pressure grinding roller. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
The wear-resistant layer is made of tungsten-cobalt hard alloy studs and inlaid on the body. Generally up to HRC67 or higher, the hardness is much higher than that of the PTA layer roller surface and the centrifugal casting composite roll surface, and the matrix of the stud roller surface can be well protected by the material lining formed. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
Type Specification of carbide HPGR studs:
Flat top, Domed top, With tip top, Hemispherical top
We can produce as your drawing or sample.
Diameter: 16mm to 32mm, we also have 9mm studs
Length: 20mm, 25mm, 30mm, 35mm, 40mm, 45mm
Surface: blank ,ground, tumble polished
Grade Information of carbide HPGR studs
Grades below are exclusive grades we developed for HPGR. Good wear resistance and high strength are suitable for metal smashing with high working efficiency.
ZZBT Grade
Density (g/cm3)
Hardness (HRA)
T.R.S (MPα)
Recommended Application
UBT92
14.65
88.2
2560
For grinding soft and middle hard
stones
or mines
UBT89
14.35
87.0
2850
For grinding soft and middle hard stones or mines
UBT85
14.20
85.5
2500
For grinding hard stones or mines
Delivery Time: within 7 days for stock sizes
around 15 days for non-stock products, depending on types and quantity
Shipping method: By express (DHL, TNT, FedEx, UPS, etc), By Air, By Sea
FAQ of carbide HPGR studs
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally within 7 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000 USD, 100% in advance. Payment>=1000 USD, 30% T/T in advance, balance before shipment.
If you have another question, pls feel free to contact us as below:
Zhuzhou Better Tungsten Carbide Co., Ltd
ADDRESS： B/V 12-305, Da Han Hui Pu Industrial Park, Zhuzhou City, China.
Phone：+86 18173392980
Tel：0086-731-28705418
Fax：0086-731-28510897
Email：[email protected]
Whatsapp/Wechat：+86 181 7339 2980
