- Isicelo: ukwenza izixhobo zokusika, ezifana ne-end Mills, i-dental burs, i-reamer njl
- Ububanzi: 3mm ukuya 30mm
- Ubude: 330mm/310mm okanye ngokwezifiso
- Isixhobo: WC+Co
inkcazelo
Sinomzi-mveliso okhethekileyo kwi-tungsten carbide, sibonelela nangezinye iimveliso ezininzi esingenako ukuzivelisa. uzibophelele kwiimveliso ezizezona ziluncedo kumntu ofuna ukufumana umgangatho olungileyo kunye neemveliso zamaxabiso angcono.
Yintoni intonga ye-tungsten carbide?
Intonga ye-tungsten carbide, ekwabizwa ngokuba yi-carbide round bar,intonga ye-carbide enesamente,yimathiriyeli enobulukhuni obuphezulu, eyomelele kakhulu kunye nobulukhuni obuphezulu obunemathiriyeli enkulu ekrwada yeWC, kunye nezinye iintsimbi kunye nezigaba zokuncamathisela zisebenzisa iindlela zemetalurgical engumgubo ngokusebenzisa i-low-pressure sintering.
Lithini ixabiso leentsimbi ze-carbide?
Tungsten intonga carbideyinto ekhethiweyo yokwenziwa kwesixhobo sokusika isinyithi, esetyenziswa ngokubanzi kumashishini aneemfuno eziphezulu zokunganyangeki, ukuxhatshazwa kwe-corrosion kunye nokushisa okuphezulu. Inomsebenzi omninzi obalaseleyo.
Ziziphi izinto ezisetyenziswayo kwiintonga ze-tungsten carbide?
Iintonga ze-Carbide zingasetyenziselwa kuphela ukusika kunye nezixhobo zokugaya (ezifana ne-micron, i-twiste drill, i-drill drill echanekileyo yesixhobo sokumbiwa kwemigodi), kodwa kunye neenaliti zokufakelwa, iindawo ezahlukeneyo ezigugileyo kunye nezixhobo zokwakha. Ukongeza, inokusetyenziswa kwiinkalo ezininzi, ezinje ngoomatshini, iikhemikhali, i-petroleum, i-metallurgy, i-electronics kunye namashishini okukhusela.
1.Iintsimbi zeCarbide zokwenza izixhobo zokusika
2.Iintsimbi zeCarbide zokwenza iipuntshi
3.Carbide iintonga ukwenza mandrels
4.Iintsimbi zeCarbide zokwenza izixhobo zokusebenza
5.Iintsimbi zeCarbide zokwenza iplunger
6.Iintsimbi zeCarbide zokwenza izixhobo zokubhoboza
I-tungsten carbide rods (ekwabizwa ngokuba yi-cemented carbide rods), isetyenziselwa ukwenza izixhobo eziphakamileyo zokusika i-carbide ukwenzela umatshini we-alloys ukumelana nobushushu, njenge-end Mill, i-drill, i-reamer.
1. Inkcazo yodidi:ØD×L
2. Isicelo: ukwenza izixhobo zokusika, umzekelo i-end Mills, i-dental burs, i-reamer njl.
3. Ububanzi: 3mm ukuya 30mm
4. Ubude: umgangatho 330mm/310mm okanye ngokwezifiso
5. Umphezulu: ungenanto okanye umhlaba
6. Izinto eziphathekayo: WC + CO
| Igama lemveliso | Iintonga ze-carbide eziqinileyo zingenanto kunye nomhlaba |
| Izinto eziphathekayo | WC+CO |
| IBanga | K05-K40 |
| Ubungakanani benkozo | kulungile, phakathi |
| Ukuqina | 87.6-94HRA |
| T.R.S | 3000-4200 |
| Umphezulu | ingenanto okanye umhlaba |
| Isicelo | Isetyenziselwa ukwenza izixhobo zokusika ezifana nee-endmill, iidrili, iireamers kunye nee-dental burrs |
Iipropati zeBanga
IBanga | ISO Code | Ubungakanani benkozo | Cobalt | Ubuninzi (g/cm3) | Ukuqina (HRA) | T.R.S(Mpa) |
UBT05 | K05-K10 | 1.0 | 6.0 | 14.95 | 92 | 3000 |
UBT10 | K05-K10 | 0.4 | 6.0 | 14.8 | 94 | 3800 |
UBT20F | K20-K40 | 0.8 | 10.2 | 14.5 | 91.5 | 3900 |
UBT20 | K20-K40 | 0.6 | 10.2 | 14.3 | 92.3 | 3800 |
UBT25 | K20-K40 | 0.4 | 12 | 14.1 | 92.5 | 4200 |
UBT30 | K30-K40 | 1.5 | 15 | 14 | 87.6 | 4000 |
izicelo zeBakala
IBanga | Isicelo esicetyiswayo |
UBT05 | I-Drill, endmill kunye ne-burr ziyacetyiswa. Ngokukodwa ifanele ukusika isinyithi esingeyontsimbi kunye negraphite (iyafuneka ukugquma) |
UBT10 | Ubungakanani obuziinkozo obugqibeleleyo, obunokungagugi kakuhle. I-endmill ekwazi ukumelana nokunxiba okuphezulu kunye nezixhobo zokukrola ziyacetyiswa. Ifanelekile ukusika iPCB kunye neplastiki |
UBT20F | I-drill kunye ne-endmill iyacetyiswa. Ifanelekile ukusika intsimbi ngokubanzi (HRC |
UBT20 | I-Drill kunye neendmill ziyacetyiswa. Ifanele ukusika intsimbi engatyiwa, ingxubevange yokumelana nobushushu kunye nentsimbi yokugalela |
UBT25 | Ubungakanani bengqolowa obucokisekileyo, isiqulatho secobalt esinokuqina kunye nokuqina, i-endmill kunye ne-reamer iyacetyiswa, ngakumbi ifanele ukusika intsimbi(HRC:45-55), ialluminiyam ialloy kunye ne-titanium alloy. |
UBT30 | Ilungele ukwenza ipunching yokungunda, izixhobo kunye ne-anti-vibration boring bar njl |
Qaphela: sinokuvelisa iintonga ze-tungsten carbide ngokwesicelo somthengi
IZhuzhou Ingcono iTungsten Carbide Co., Ltd
Idilesi:B/V 12-305, Da Han Hui Pu Industrial Park, Zhuzhou City, China.
Ifowuni:+86 18173392980
Umnxeba:0086-731-28705418
Ifeksi:0086-731-28510897
imeyile:zzbt@zzbetter.com
Whatsapp/Wechat:+86 181 7339 2980
